BenQ W1050 User Manual - Page 40
Adjusting the sound, Locking control keys
View all BenQ W1050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Adjusting the sound The sound adjusents made as below will have an effect on the projector speaker(s). Be sure you have made a correct connection to the projector audio input. See "Connection" on page 19 for how the audio input is connected. Muting the sound To adjust the sound level, press remote control, or: on the 1. Open the OSD menu and go to the Audio menu (which is in the Basic menu or in the Advanced menu > Audio menu). 2. Select Mute and select On. Adjusting the sound level To adjust the sound level, press / on the remote control, or: 1. Repeat steps 1 above. 2. Select Volume and select a desired sound level. Turning off the Power On/Off Ring Tone To turn off the ring tone: 1. Go to the Advanced menu > Audio menu. 2. Select Power On/Off Ring Tone and select Off. The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound mute or changing the sound level will not affect the Power on/off ring tone. Adjusting the microphone's sound level To adjust the sound level: 1. Go to the Advanced menu > Audio menu. 2. Select Microphone Volume and select a desired sound level. Microphone sound will still function even though Mute is activated. Locking control keys With the control keys locked, you can prevent your projector settings from being changed accidentally (by children, for example). When Key Lock is On, no control keys on the projector will operate except POWER. To lock the keys: 1. Open the OSD menu and go to the Advanced menu > System Setup: Advanced > Key Lock. 2. Press / to select On. A warning message appears. Select Yes and press OK on the projector or remote control. The control keys lock. 40 Operation