BenQ W600 User Manual - Page 18
Connection, Connecting a computer - accessories
UPC - 840046016043
View all BenQ W600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
English Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores. Connecting a computer Connecting a computer The projector provides a VGA input socket that allows you to connect it to both IBM® compatibles and Macintosh® computers. A Mac adapter (an optional accessory) is needed if you are connecting legacy version Macintosh computers. To connect the projector to a notebook or desktop computer: • With a VGA cable: • With a HDMI cable: Your computer must be equipped with a HDMI output socket. 1. Take a VGA cable and connect one 1. Take a HDMI cable and connect one end to the D-Sub output socket of end to the HDMI socket of the the computer. Connect the other end computer. Connect the other end of of the VGA cable to the the cable to the HDMI 1 or 2 signal COMPUTER PC signal input input socket on the projector. socket on the projector. 2. If you wish to make use of the projector (mixed mono) speaker in your presentations, take a suitable audio cable and connect one end of the cable to the audio output socket of the computer, and the other end to the AUDIO socket of the projector. Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Audio Settings" on page 45 for details. The final connection path should be like that shown in the following diagram: Notebook or desktop computer 1 2 1. Audio cable 2. VGA cable 3 3. HDMI cable Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/ off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key simultaneously. Refer to your notebook's documentation to find your notebook's key combination. 18 Connection