BenQ W600 User Manual - Page 27

English If you forget the password If the password function is activated, you will be asked to enter the five-digit password every time you turn on the projector. If you enter the wrong password, the Password Error password error message as pictured to the right Please Try again. displays lasting for three seconds, and the message 'INPUT PASSWORD' follows. You can retry by entering another five-digit password, or if you did not record the password in this manual, and you absolutely do not remember it, you can use the password recall procedure. See "Entering the password recall procedure" on page 27 for details. If you enter an incorrect password 5 times in succession, the projector will automatically shut down in a short time. Entering the password recall procedure 1. Press and hold AUTO on the projector for 3 seconds. The projector will display a coded RECALL PASSWORD number on the screen. 2. Write down the number and turn off your Please write down the recall code, and contact BenQ Customer Center. projector. 3. Seek help from the local BenQ service center to decode the number. You may be required to provide proof of purchase documentation to Recall code: 12345678 verify that you are an authorized user of the MENU Back projector. Changing the password 1. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security Settings > Change password menu. 2. Press MODE/ENTER. The message 'INPUT CURRENT PASSWORD' displays. 3. Enter the old password. • If the password is correct, another message 'INPUT NEW PASSWORD' displays. • If the password is incorrect, the password error message displays lasting for three seconds, and the message 'INPUT CURRENT PASSWORD' displays for your retry. You can press MENU/EXIT to cancel the change or try another password. 4. Enter a new password. The digits being input will display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is available to you should you ever forget it. Password Keep this manual in a safe place. 5. Confirm the new password by re-entering the new password. 6. You have successfully assigned a new password to the projector. Remember to enter the new password next time the projector is started. Password Changed 7. To leave the OSD menu, press MENU/EXIT. Operation 27