BenQ W600 User Manual - Page 41
Adjusting the sound
UPC - 840046016043
View all BenQ W600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
English Adjusting the sound The sound adjustments made as below will have an effect on the projector speakers. Be sure you have made a correct connection to the projector audio input. See "Connection" on page 18 for how the audio input is connected. INPUT SOURCE Computer PC HDMI 1/2 Component VIDEO S-VIDEO AUDIO IN mini jack HDMI RCA RCA RCA AUDIO OUT mini jack mini jack mini jack mini jack mini jack Muting the sound To temporarily turn off the sound, • Using the remote control Press MUTE to temporarily turn off the sound. While the sound is off, the screen will display in the upper right corner of the screen. To restore the sound, press MUTE again. • Using the OSD menu 1. Press MENU/EXIT and then press / until the SYSTEM SETUP: Advanced menu is highlighted. 2. Press to highlight Audio Settings and press ENTER. The Audio Settings page displays. 3. Highlight Mute and press / to select On. 4. To restore the sound, repeat steps 1-3 and press / to select Off. Adjusting the sound level To adjust the sound level, • Using the remote control Press or - to select a desired sound level. • Using the OSD menu 1. Repeat steps 1-2 above. 2. Press to highlight Volume and press / to select a desired sound level. Turning off the Power on/off ring tone 1. Repeat steps 1-2 above. 2. Press to highlight Power on/off ring tone and press / to select Off. The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute or changing the sound level will not affect the Power on/off ring tone. Operation 41