BenQ W600 User Manual - Page 29
Switching input signal, Changing Color Space
UPC - 840046016043
View all BenQ W600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
English Switching input signal The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. Be sure the Quick Auto Search function in the SOURCE menu is On (which is the default of this projector) if you want the projector to automatically search for the signals. You can also manually cycle through the available input signals. 1. Press SOURCE on the projector or press input source directly from the remote control. A source selection bar displays. 2. Press / until your desired signal is selected and press MODE/ENTER. Once detected, the selected source information will display on the screen for seconds. If there is multiple equipment connected to the projector, repeat steps 1-2 to search for another signal. • When SOURCE is activated, the Quick Auto Search function will be turned off automatically until restarting the projector. • The brightness level of the projected image will change accordingly when you switch between different input signals. Data (graphic) "PC" presentations using mostly static images are generally brighter than "Video" using mostly moving images (movies). PC HDMI 1 HDMI 2 COMPONENT VIDEO S-VIDEO • The native display resolution of this projector is in a 16:9 aspect ratio. For best display picture results, you should select and use an input signal which outputs at this resolution. Any other resolutions will be scaled by the projector depending upon the 'aspect ratio' setting, which may cause some image distortion or loss of picture clarity. See "Selecting the aspect ratio" on page 32 for details. Changing Color Space In the unlikely event that you connect the projector to a DVD player via the projector's HDMI input and the projected picture displays wrong colors, please change the color space. To do this: 1. Press MENU/EXIT and then press / until the SOURCE menu is highlighted. 2. Press to highlight Color Space Conversion and press / to select the setting. This function is only available when the HDMI input socket is in use. Operation 29