BenQ WDC10C User Manual - Page 11
Assembling the InstaShow Host, Attaching the InstaShow Host to the ceiling
![]() |
View all BenQ WDC10C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Assembling the InstaShow Host Assemble the InstaShow Host with two antennas by turning the antennas clockwise (right) and counterclockwise (left) to fasten them tightly. Setting up the InstaShow Host You are provided with four different ways to position the InstaShow Host. The total weight of the InstaShow Host Unit is 150g. Attaching the InstaShow Host to the ceiling 1. Place the lid on the ceiling and locate the alignment hole. 2. Use the screws provided to lock the lid to the ceiling. 3. Lock the first hole (1). 4. Follow the instruction in the illustration below to lock the other holes (2-4). 5. Rotate the InstaShow Host counterclockwise to affix the InstaShow Host to the lid. 1 Alignment 3 4 hole 2 open lock open lock open lock • Please only use the screws (M3*16 tapping screw) provided with the kit to mount the InstaShow Host to the ceiling. • Please see Positioning the InstaShow Host antennas on page 15 for guidelines on positioning the antenna to maximize signal reception. Attaching the InstaShow Host to a ceiling mount If the display is mounted on the ceiling: Installation 11
![](/manual_guide/products/benq-wdc10c-user-manual-9fc3ec1/11.png)