BenQ WDC10C User Manual - Page 26
Resetting a InstaShow Button
![]() |
View all BenQ WDC10C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
• You want to clear the web management interface of all changes made to its configurations, such as pairing information, passwords, SSID, Frame Rate, etc. and return it back to its default settings. Refer to Web management on page 34 for more information. • You are unable to access the web management interface (for instance due to an altered or lost password). Reset the InstaShow Host using the following steps: 1. Connect the DC/Micro-USB port on the InstaShow Host to a power source and wait for at least 30 seconds. After the InstaShow Host has been connected to a power source for at least 30 seconds, the InstaShow Host LED may indicate any one of the statuses described in LED indicators of the InstaShow Button and InstaShow Host. As long as the InstaShow Host has been connected to a power source for at least 30 seconds, you may proceed to the next step of the resetting process regardless of the status of the InstaShow Host LED. 2. Poke the RESET hole at the rear of the InstaShow Host with a pin for at least 2 seconds. 3. The InstaShow Host LED will begin quick flashing red (flash red twice every second) for 10 seconds, then light up static red for 15 to 20 seconds, indicating that the InstaShow Host is resetting. 4. Once the InstaShow Host LED lights up static green the resetting process is complete. Do not disconnect the InstaShow Host from its power source at any time during the resetting process. Resetting a InstaShow Button Resetting an InstaShow Button allows you to return the InstaShow Button to its original factory settings. You may want to reset an InstaShow Button because it has been paired to a different InstaShow Host (one which was not originally included with the InstaShow Button in the package), and you want to quickly pair it back to its original InstaShow Host. Reset an InstaShow Button using the following steps: 1. Place the InstaShow Button within range of the original InstaShow Host and ensure the LED on the InstaShow Host is static green. 26 Installation
![](/manual_guide/products/benq-wdc10c-user-manual-9fc3ec1/26.png)