Home » BenQ Manuals » Wireless » BenQ WDC10C » Manual Viewer

BenQ WDC10C User Manual - Page 15

Positioning the InstaShow Host antennas, For ceiling installation - instashow manual

Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Positioning the InstaShow Host antennas Once you have properly installed the InstaShow Host, follow the guidelines below to position the antennas to maximize signal reception: For ceiling installation Position the antennas so that they are both pointed downwards at an angle roughly perpendicular to the ceiling: For ceiling mount installation • Position the antennas so that they are both point either upwards or downwards roughly parallel to the ceiling mount: • If you encounter bad signal reception after initial use of the InstaShow Host you can manually adjust the antennas so that they tilt at a slight angle to maximize signal reception. When doing so, avoid tilting the antennas toward the ceiling mount: Installation 15

Section	Page
Copyright	2
Disclaimer	2
BenQ ecoFACTS	2
Introduction	5
Product features	5
Package content	6
Product specification	7
Overview	8
InstaShow Button	8
InstaShow Host	8
LED indicators of the InstaShow Button and InstaShow Host	9
Installation	10
Environment check	10
Assembling the InstaShow Host	11
Setting up the InstaShow Host	11
Attaching the InstaShow Host to the ceiling	11
Attaching the InstaShow Host to a ceiling mount	11
Placing the InstaShow Host on a table	12
Installing the InstaShow Host on the wall or trolley	14
Positioning the InstaShow Host antennas	15
For ceiling installation	15
For ceiling mount installation	15
For table placement	16
Connecting the HDMI cable and power	16
Assembling the adapter	17
Connecting the HDMI cable	18
Power supply via a USB type A jack (5V/1.5A)	18
Power supply via a power adapter	19
LAN connection	19
Setting up and powering an InstaShow Button	19
Pairing a InstaShow Button and InstaShow Host	22
When the InstaShow Host is placed on a table	22
Waking up the InstaShow Host	25
Storing InstaShow Buttons in the cradle	25
Resetting a InstaShow Host	25
Resetting a InstaShow Button	26
Starting and stopping presentations	29
Getting ready	29
Starting presentation	29
Idle presentation	31
Play video with InstaShow™	32
Web management	34
Accessing the web management interface	34
Logging into the web management interface via direct connection	34
Logging into the web management interface via LAN	37
Logging into the web management interface via a wireless network	38
Getting started	39
Top command buttons	39
Change language	39
Logging out	39
Main column	40
Function bar	40
Information	40
WAN	41
Wireless Network	42
Pairing	45
Advance Setting	48
Scheduling	54
Tool	55
Legal Announcement	58

Match case Limit results 1 per page

Installation

Positioning the InstaShow Host antennas

Once you have properly installed the InstaShow Host, follow the guidelines below to position the

antennas to maximize signal reception:

For ceiling installation

Position the antennas so that they are both pointed downwards at an angle roughly perpendicular to

the ceiling:

For ceiling mount installation

• Position the antennas so that they are both point either upwards or downwards roughly parallel to

the ceiling mount:

• If you encounter bad signal reception after initial use of the InstaShow Host you can manually adjust

the antennas so that they tilt at a slight angle to maximize signal reception. When doing so, avoid

tilting the antennas toward the ceiling mount: