BenQ WDC10C User Manual - Page 22
Pairing a InstaShow Button and InstaShow Host, When the InstaShow Host is placed on a table
View all BenQ WDC10C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Pairing a InstaShow Button and InstaShow Host A InstaShow™ set includes an InstaShow Host and two InstaShow Buttons, which are paired before shipment. In such a case, you don't need to pair them again. However, if you buy two or more sets of InstaShow™, and you want to pair an InstaShow Button with a different InstaShow Host, you need to follow the instruction below. If you buy an additional InstaShow Button kit, and you want to pair the new InstaShow Buttons with your InstaShow Host, you need to follow the instruction below as well. When the InstaShow Host is placed on a table 1. Make sure your InstaShow Host is ready with power supply. Connect the InstaShow Button's USB-C™ jack to the corresponding input of a laptop. USB-C™ MODE 2. When the InstaShow Button is connected to the laptop, the LED indicator of the InstaShow Button will flash red. The InstaShow Button is in pairing mode, waiting to pair with your InstaShow Host. If an InstaShow Button nearby has been paired with an InstaShow Host before, it will turn static green. 22 Installation