Beretta Cx4 Storm Beretta CX4 Storm User Manual - Page 30

UNLOADING THE MAGAZINE • To unload the magazine, grasp it with one hand around the magazine box, bottom down and front end forward. With the tip of the thumb firmly press down on the cartridge rim and push towards the front of magazine box. As the cartridge moves forward, tip it slightly upward with the index finger. • Repeat until the magazine is unloaded. ! ! 72 ADJUSTING THE SIGHTS AND SIGHTING WARNING: Always be certain that the carbine is unloaded before adjusting the sights. Please refer to the instructions given in the "Load check" paragraph. WARNING: Make sure the carbine is pointed in a safe direction. The Beretta Cx4 Storm features a fully adjustable front sight for elevation and windage and an adjustable peep rearsight for long and short range distances. Both sights may be folded down when optics are used. The upper part of the carbine is designed to accept the mounting of optional Picatinny rails for the application of scopes and aiming systems on request. FRONT SIGHT - WINDAGE ADJUSTMENT To move the point of impact to the right: Using the supplied tool (Fig. 4-Z) loosen the screw on the right of the front sight (as viewed from the rear) clockwise in the direction of the arrow (R= right). Proceed one click at a time. (Fig. 19) To move the point of impact to the left: Using the supplied tool (Fig. 4-Z) loosen the screw on the right of the front sight (as viewed from the rear) counterclockwise in the opposite direction of the arrow. Proceed one click at a time. (Fig. 19)