Beretta Cx4 Storm Beretta CX4 Storm User Manual - Page 35
Picatinny Rails, Mounting The Stock Spacers
View all Beretta Cx4 Storm manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
WARNING: Always unload the firearm immediately after shooting ! is completed. Never store a loaded firearm. To store the firearm see the dedicated paragraph (Storing). PICATINNY RAILS ! WARNING: Always be certain that the carbine is unloaded. Please refer to the instructions given in the "Load check" paragraph. ! WARNING: Make sure the carbine is pointed in a safe direction. Under the barrel, inside the fore-end of the upper receiver, the standard Picatinny type rail supplied with your carbine can be extracted. (Fig. 2-S) To do so, push the front sling swivel and simultaneously extract the internal rail (Fig. 21). To mount the side Picatinny type rail included with your carbine, it is sufficient to attach it with the two screws supplied into their respective seats. (Fig. 2-T) The rail can be mounted on both sides of the receiver (Fig. 22). Other optional Picatinny rails to mount on the top of the frame (MIL-STD-1913) (Fig. 23) and under the barrel (Fig. 24) are available on request. MOUNTING THE STOCK SPACERS WARNING: Always be certain that the carbine is unloaded. Please refer to the instructions given in the "Load check" paragraph. WARNING: Make sure the carbine is pointed in a safe direction. Notice: It is advisable to disassemble the stock from the receiver/barrel/bolt assembly (see paragraph regarding disassembly). If you wish to mount additional spacers (available on request) on the stock in order to increase the length or to remove the one already mounted in order to decrease the length of the stock, proceed as follows: ! ! 77