Biostar M7NCD ULTRA M7NCD Ultra user's manual - Page 12
Power Source Selection for USB: JUSBV1/ JUSBV2/ JUSBV4, Clear CMOS Jumper: JCMOS - bios
View all Biostar M7NCD ULTRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Power Source Selection for USB: JUSBV1/ JUSBV2/ JUSBV4 JUSBV1/JUSBV2/ Assignment JUSBV4 Description 1 3 +5V JUSBV1: 5V for JUSB1 port Pin 1-2 close JUSBV2: 5V for JUSBLAN1 port JUSBV4: 5V for JUSB2 port 1 3 Pin 2-3 close +5V Standby JUSBV1: JUSB1 port powered with Voltage standby voltage of 5V JUSBV2: JUSBLAN1 port powered with standby voltage of 5V JUSBV4: JUSB2 port powered with standby voltage of 5V Note: 1. In order to power-on USB devices function, "JUSBV1/JUSBV2/ JUSBV4" jumper cap should be placed on pin 2-3 respectively. 2. For S3 mode, "JUSBV1/ JUSBV2/ JUSBV4" jumper cap should be placed on pin 2-3 respectively. Clear CMOS Jumper: JCMOS JCMOS 3 Assignment 1 Pin 1-2 Close 3 Normal Operation (default) 1 Pin 2-3 Close Clear CMOS Data The following procedures are for resetting the BIOS password. It is important to follow these instructions closely. 10