Biostar M7NCD ULTRA M7NCD Ultra user's manual - Page 13

※ Clear CMOS Procedures: 1. Remove AC power line. 2. Set the jumper to "Pin 2-3 Close". 3. Wait for five seconds. 4. Set the jumper to "Pin 1-2 Close". 5. Power on the AC. 6. Reset your desired password or clear the CMOS data. Case Open Connector: JC1 Pin Assignment 1 1 Case Open Signal JC1 2 Ground CD-ROM Audio-In Header: JCDIN1 Pin Assignment 1 1 Left Channel Input 2 Ground JCDIN1 3 Ground 4 Right Channel Input Front Panel Audio Header: JF_AUDIO1 9 1 10 2 JF_AUDIO1 Pin Assignment Pin Assignment 1 Mic In/ Center 2 Ground 3 Mic Power/ Bass 4 Audio Power 5 Right Line Out/ Speaker 6 Right Line Out/ Speaker Out Right Out Right 7 Reserved 8 Key 9 Left Line Out/ Speaker 10 Out Left Digital Audio Connector: J_SPDIF1 Left Line Out/ Speaker Out Left 1 Pin Assignment 1 +5V 2 SPDIF_OUT J_SPDIF1 3 Ground 11