Biostar P4TSE P4TSE user's manual - Page 5
English - socket 478
View all Biostar P4TSE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
English P4TSE Features A. Hardware CPU Provides Socket-478. Supports the Intel Pentium 4 processor to 3.6GHz+. Front Side Bus at 400/533/800MHz. Supports Hyper-Threading Technology. Supports Northwood and Prescott CPU. (Willamette not supported) Chipset North Bridge: Intel 865PE. South Bridge: Intel ICH5. Main Memory Supports one or two 64-bit wide DDR data channels with 1 or 2 DIMMs per-channel. Available bandwidth up to 3.2GB/s(DDR400) for single-channel mode and 6.4GB/s (DDR 400) in dual channel mode. Supports 128-Mb, 256-Mb, 512-Mb DDR technologies. Supports only x8, x16, DDR devices.( Does not support registered DIMMs and double-sided X 16 DIMMs) Supports four bank devices. Maximum memory size is 4GB. Super I/O Chip: ITE IT8712. Low Pin Count Interface. Provides the most commonly used legacy Super I/O functionality. Environment Control initiatives, - H/W Monitor - Fan Speed Controller - ITE's "Smart Guardian" function Slots Five 32-bit PCI bus master slots. One CNR slot. One AGP 4X/8X slot. On Board IDE Supports four IDE disk drives. Supports PIO Mode 5, Bride Mode and Ultra DMA 33/66/100 Bus Master Mode. Supports 2 Serial ATA (SATA) ports. 3