Bissell ProHeat 2X Upright Carpet Cleaner 1383 User Guide - Page 12
Hard floor cleaning
View all Bissell ProHeat 2X Upright Carpet Cleaner 1383 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Operations Hard floor cleaning (Select models only) Your PROheat 2X model may have come with a hard floor attachment and 2X Hard Floor Solutions Formula. If not, these products are available for purchase by contacting the BISSELL Consumer Care department by phone or at the website. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors. Caution: Do not use on unsealed hardwood floors. 1. Vacuum or sweep thoroughly to pick up any loose debris and pet hair. 2. Move any furniture, if needed. 3. Fill the formula tank to "WATER" line with water. Fill to "FORMULA" line with BISSELL 2X Hard Floor Solutions. 4. Fill the 2-in-1 water tank with hot tap water (140°F/60°C MAX) and set aside. 5. Attach the hard floor tool onto the bottom of the machine by hooking it into the nozzle and swinging it down until it clicks into place. 6. Set ReadyTools dial to the "FLOOR CLEANING" setting. 7. Set the Custom Clean dial to NORMAL clean. 8. Plug into an outlet and turn the power switch and heater ON ( I ). 9. Slowly move the machine forward and back over hard floor surface one time while depressing trigger. Caution: Do not overwet. 10. Repeat the motion without pressing the trigger using the hard floor tool to squeegee and suction up the dirty water. 11. Allow adequate time for floors to dry. 12. Remove hard floor tool, rinse and dry before storing. 13. Rinse out the formula tank. WARNING To reduce the risk of fire and electric shock- when cleaning a hard floor, the BISSELL hard floor tool 203-5642 must be used and it must only be used with BISSELL 2X Hard Floor Solutions cleaning fluid intended for use with this appliance. 5. www.bissell.com 12 800.237.7691