Bissell ProHeat 2X Upright Carpet Cleaner 1383 User Guide - Page 9

Cleaning with attachments

Page 9 highlights

Operations Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank. Always check the level of cleaning formula in the formula tank at the same time, and refill as needed. 6. Water rinse (recommended). Rinsing is an optional step that can be done during the cleaning process or after the carpeted area has been completed. Empty the heavy-duty bladder if necessary and refill with hot tap water only. Replace the tank on the machine. Take care to do a forward (wet) stroke by depressing the trigger, and a backward (wet) stroke, followed by a forward and backward (dry) stroke, releasing the trigger. Continue this until the water you see coming up the nozzle is clear. (see page 13 for more machine care tips.) Cleaning with attachments Your PROheat 2X machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. 1. Important! If using to clean upholstery, check upholstery tags. a. Check manufacturer's tag before cleaning. "W" or "WS" on the tag means you can use your PROheat 2X. If the tag is coded with an "X" or an "S" (with a diagonal stripe through it), or says "Dry Clean Only", do not proceed with any deep cleaning machine. Do not use on velvet or silk. If manufacturer's tag is missing or not coded, check with your furniture dealer. b. Check for colorfastness in an inconspicuous place. c. If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet. d. Plan activities to allow upholstery time to dry. e. Pick up any loose dirt, debris and pet hair before deep cleaning. 2. Follow the instructions on page 7 for filling the 2-in-1 water and formula tank. 3. Set ReadyTools dial to the "TOOLS" setting. This will allow spray and suction from the hose. 4. Attach the cleaning tool to the end of the hose. 5. Plug in and turn on the power switch and heater (if desired). WARNING To reduce the risk of injury, be extra careful when cleaning stairs. Make sure machine is secure and level. gcghchvjbj bAjjhdjfkfshndlfhkdnldlgbghj hjkgvhbvh Manufacturer's tag 4. www.bissell.com 800.237.7691 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

NOTE: Remember to secure the tank latch in
the back and test to make sure it is secure
before picking up the tank. Always check the
level of cleaning formula in the formula tank at
the same time, and refill as needed.
6.
Water rinse (recommended). Rinsing
is an optional step that can be done during the
cleaning process or after the carpeted area has
been completed. Empty the heavy-duty bladder
if necessary and refill with hot tap water only.
Replace the tank on the machine. Take care to
do a forward (wet) stroke by depressing the
trigger, and a backward (wet) stroke, followed by
a forward and backward (dry) stroke, releasing
the trigger. Continue this until the water you see
coming up the nozzle is clear. (see page 13 for
more machine care tips.)
Cleaning with attachments
Your PROheat 2X machine comes equipped with
a hose and at least one attachment for cleaning
stairs, upholstery, and more.
1. Important!
If using to clean upholstery, check
upholstery tags.
a.
Check manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you can use
your PROheat 2X. If the tag is coded with an
“X” or an “S” (with a diagonal stripe through
it), or says “Dry Clean Only”, do not proceed
with any deep cleaning machine. Do not
use on velvet or silk. If manufacturer’s tag
is missing or not coded, check with your
furniture dealer.
b.
Check for colorfastness in an
inconspicuous place.
c.
If possible, check upholstery stuffing.
Colored stuffing may bleed through fabric
when wet.
d.
Plan activities to allow upholstery time
to dry.
e.
Pick up any loose dirt, debris and pet hair
before deep cleaning.
2.
Follow the instructions on page 7 for filling
the 2-in-1 water and formula tank.
3.
Set ReadyTools dial to the “TOOLS” setting.
This will allow spray and suction from the hose.
4.
Attach the cleaning tool to the end of the hose.
5.
Plug in and turn on the power switch and
heater (if desired).
Operati´s
WARNING
To reduce the risk of injury, be extra careful when cleaning
stairs. Make sure machine is secure and level.
www.BISSELL.com
800.237.7691
9
4.
Adsdfdd ghg bvh
cvbbj jkn hnbj jkvh
gcghhjj
jhffhl kllgh
Manufacturer’s tag