Bosch B18ID80NRP Installation Instructions - Page 23
floor, application, Concrete floor, applications
View all Bosch B18ID80NRP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Wood floor application Use the (5 x 60 mm) and (4 x 15 mm) wooden screws provided. q Drill pilot holes: 1/8" (3 mm) for the (5 x 60 mm) wooden screws 5/64" (2 mm) for the (4 x 15 mm) wooden screws Being certain the screws penetrate through the flooring and into the wall plate a minimum of 3/4" (19 mm). q Attach the antiĆtipĆbracket completely. Be sure screws hold tight. q Manually insert the screw into the wall plug until the screw begins to resist. q Knock the wall plug and screw into the hole until the screw head is approx. ½" (13 mm) from the antiĆtip bracket. q Tighten the screw. Concrete floor applications d CAUTION d Always wear safety glasses and other necessary protective devices or apparel when installing or working with anchors ć risk of injury! Not recommended for use in lightĆweight masonry material such as block or brick. Not recommended for use in new concrete which has not had time to cure. Do not use core drills to drill holes for this anchor. Use concrete anchor M8 and M8 srew. Additional use the (5x60 mm) and (4x15 mm) wooden screws provided. q Drill a 10 mm diameter hole any depth exceeding the minimum embedment. Use the provided drill. q Clean hole or continue drilling additional depth. 23