Bosch B18ID80NRP Installation Instructions - Page 40
Mounting of air, separator
View all Bosch B18ID80NRP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
29. Mounting of air separator Screw the air separator to the furniture door in order to separate the supply and waste air. q Push cover strips on the longitudinal side into the gap between the furniture door and glass pane. q Cut the cover strips on the short sides to the required length. q Shorten the air separator to the required length. q Attach the air separator with the 2 clamps. Align the air separator with the center line of the door as illustrated in the diagram. q Slowly close the door. Check whether the air separator collides with parts of the ventilation grille. If required, shorten the longitudinal side of the air separator by approx. 6mm. For appliances with iceĆwater dispenser: q The air separator must be cut out in the area of the hose. q Slide cover strips in the gap between the furniture door and glass pane. 40