Bosch VDC-455V04-20S Installation Instructions - Page 14
Setting up the camera, Warning: Hot Surface
View all Bosch VDC-455V04-20S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
FlexiDomeXT+ | Installation Manual EN | 14 Setting up the camera Warning: Hot Surface The Heater will be HOT when in operation - DO NOT TOUCH. Always switch the heater OFF, when working on the camera. Refer to the installer menu (see Menu Structure) for instructions. You can connect a monitor to the miniature 2.5mm jack socket on the printed circuit board to help set up the camera. This socket provides a composite video signal (with sync). An optional cable (code number S1460) is available for making this connection. Focus Focal length Heater Monitor jack Thumbwheels Bosch Security Systems | 2008-08 | V1.1 Navigation switches
FlexiDome
XT+
| Installation Manual
Bosch Security Systems | 2008-08 | V1.1
EN | 14
Setting up the camera
You can connect a monitor to the miniature 2.5mm jack socket on the
printed circuit board to help set up the camera. This socket provides a
composite video signal (with sync). An optional cable (code number
S1460) is available for making this connection.
Warning: Hot Surface
The Heater will be HOT when in operation - DO NOT TOUCH. Always
switch the heater OFF, when working on the camera.
Refer to the installer menu (see Menu Structure) for instructions.
Thumbwheels
Monitor jack
Navigation
switches
Focus
Focal length
Heater