Bosch VDN-498V03-21 User Manual - Page 21
Setting up the camera
View all Bosch VDN-498V03-21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
FlexiDome2X Connection and set-up | en 23 4.2 4.2.1 ! Setting up the camera Camera positioning CAUTION! The Heater will be hot when in operation - Do not touch. Always switch the heater off when working on the camera, refer to Section 4.2.4 Heater, Page 26 and Section 5.6.2 Connections submenu, Page 42. To assist in setting up the camera, connect a monitor to the miniature 2.5 mm jack socket (2). This socket provides a composite video signal (with sync). An optional cable (code number S1460) is available for making this connection. When the S1460 cable is attached, there is no video available on the BNC connector to avoid interference. A C Figure 4.1 Camera parts 1. Heater 2. Monitor jack socket 3. Thumbwheels Bosch Security Systems Installation Manual B AR18-08-B010 | v1.0 | 2009.03