Bosch VDN-498V03-21 User Manual - Page 32

FlexiDome2X Item SensUp Dynamic EXIT Configuration | en 35 Selection Description Off, 2x, 3x, ..., 10x Selects the factor by which the sensitivity of the camera is increased. It is dynamic and so is only active when light levels are low. When active, some noise or spots may appear in the picture. This is normal camera behavior. It may also cause motion blur on moving objects. Returns to main menu. 5.5.4 Item Day/Night submenu Selection Description Day/Night Auto, Color, Monochrome Auto - the camera switches the IR cut-off filter on and off depending on the scene illumination level. Monochrome - the IR cut-off filter is removed, giving full IR sensitivity. Color - the camera always produces a color signal regardless of light levels. Switch level -15 to +15 Sets the video level in Auto mode at which the camera switches to monochrome operation. A low (negative) value means that the camera switches to monochrome at a lower light level. A high (positive) value means that the camera switches to monochrome at a higher light level. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03