Bosch VDN-498V03-21 User Manual - Page 26

FlexiDome2X Configuration | en 29 5 Configuration The camera normally provides an optimal picture without the need for further adjustments. There are six pre-defined modes with settings to make configuration easier. Advanced set-up options are available in a menu system for getting the best results under special circumstances. The camera implements your changes immediately so that before and after settings are easily compared. 5.1 5.1.1 5.1.2 Menu access Use the five navigation buttons on the camera for selecting and navigating through the various menus. There are two upper level menus: a Main menu and an Install menu. The menus have functions that can be selected directly or submenus for more detailed set-up. Use the up/down, right/left buttons for navigation. Up button Menu/Select button (center) Right button Down button Left button Main menu To access the Main menu, press the menu/select button (center) for less than 1 second. The Main menu appears on the monitor. The Main menu allows you to select and set-up the picture enhancement functions. If you are not happy with your changes, you can always recall the default values for the mode. Install menu The camera also has an Install menu in which the installation settings can be set. To access the Install menu, press the menu/select button (center) for longer than 1 second. Bosch Security Systems Installation Manual AR18-08-B010 | v1.0 | 2009.03