Bosch VJT-X10S Operation Manual - Page 26
Configuring the VideoJet X10, Unit IP address, Reboot, Reset, Additional Parameters, NOTICE
View all Bosch VJT-X10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
26 en | Installation VideoJet X10 Configuring the VideoJet X10 You can start the Configuration Manager immediately after installation. 1. Double-click the icon on the desktop or start the program via the Start menu. After the program has started, the network is immediately searched for compatible video servers. 2. You can start the configuration if a VideoJet X10 is shown in the list in the left section of the window. To do this, right-click the entry for the unit. 3. Click Unit network settings... in the popup menu. 4. In the Unit IP address field, enter a valid IP address to operate on your network (for example 192.168.0.10) and click OK. The unit reboots and the IP address is valid. 5. If required, enter an appropriate subnet mask for the IP address, and additional network data. NOTICE! i You must reboot to activate the new IP address, a new subnet mask or a gateway IP address. Reboot You can trigger the reboot directly with the assistance of the Configuration Manager. X Right-click the entry for the unit in the list in the left section of the window and select the Reset command from the context menu. Additional Parameters You can check and set additional parameters with the assistance of the Configuration Manager. You can find detailed information on this in the documentation for this program. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems