Bosch VJT-X10S Operation Manual - Page 28
Establishing the Connection
![]() |
View all Bosch VJT-X10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
28 en | Configuration Using a Web Browser VideoJet X10 Establishing the Connection Before you can operate the VideoJet X10 within your network, it must have a valid IP address for your network and a compatible subnet mask. The following default address is preset at the factory: 192.168.0.1 1. Start the Web browser. 2. Enter the IP address of the VideoJet X10 as the URL. The connection is established and after a short time you will see the LIVEPAGE with the video image. Maximum Number of Connections If you do not connect, the unit may have reached its maximum number of connections. Depending on the unit and network configuration, each VideoJet X10 can have up to 25 Web browser connections or up to 50 connections via VIDOS or Bosch Video Management System. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems
![](/manual_guide/products/bosch-vjtx10s-operation-manual-a6a487b/28.png)