Bosch VJT-X10S Operation Manual - Page 72
Standard with JPEG, Sender name
View all Bosch VJT-X10S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
72 en | Configuration Using a Web Browser VideoJet X10 Mail server IP address Enter the IP address of a mail server that operates on the SMTP standard (Simple Mail Transfer Protocol). Outgoing e-mails are sent to the mail server via the address you entered. Otherwise leave the box blank (0.0.0.0). SMTP user name Enter a registered user name for the chosen mailserver here. SMTP password Enter the required password for the registered user name here. Format You can select the data format of the alarm message. - Standard (with JPEG) E-mail with attached JPEG image file. - SMS E-mail in SMS format to an e-mail-to-SMS gateway (for example to send an alarm by cellphone) without an image attachment. CAUTION! ! When a cellphone is used as the receiver, make sure to activate the e-mail or SMS function, depending on the format, so that these messages can be received. You can obtain information on operating your cellphone from your cellphone provider. Attach JPEG from camera Click the checkbox to specify that JPEG images are sent from the camera. An enabled video input is indicated by a check mark. Destination address Enter the e-mail address for alarm e-mails here. The maximum address length is 49 characters. Sender name Enter a unique name for the e-mail sender, for example the location of the unit. This will make it easier to identify the origin of the e-mail. Test e-mail You can test the e-mail function by clicking the Send Now button. An alarm e-mail is immediately created and sent. DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Systems