Bosch WTMC5521UC Operating, Care, Installation (all languages) - Page 10
Check, before, using, dryer, Preparing, transport - gas dryer
View all Bosch WTMC5521UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Check list before using the dryer 1. Check that steps 1-12 have been implemented properly. 2. Ensure that the dryer is connected to the power supply. 3. Open the shutoffĆvalve. 4. Read the operating instructions to understand how your dryer operates. 5. Conduct an appliance test: q Check that the drum is empty. q Close the dryer door. q Switch the dryer to Extra Dry" and then press the Start button. q After 3-5 minutes press the Stop button and open the door. 6. If the interior of the dryer feels warm, the dryer has been connected properly. Switch the dryer to Off". 7. If the dryer does not work, switch the dryer to Off". Look in the troubleshooting section (page 20) of the OPERATING INSTRUCTIONS and find the fault. Preparing to transport the dryer ć step by step 1. Close the shutĆoff valve. 2. Rotate the program selector to Off". 3. Pull out the power supply plug or turn off the circuit breaker. 4. Disconnect gas supply 5. Disconnect the exhaust duct from the exhaust air outlet on the dryer. 6. Place any accessories in the drum. 7. Close the door and secure with adhesive tape. 8. Screw the heightĆadjustable feet of the dryer into the housing to prevent them from being damaged during transportation. 10