Bose Acoustimass 700 Owner's guide - Page 9
Setting, speakers,
View all Bose Acoustimass 700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Setting Up Cube speakers it or each connection to the cube speakers, push the terminal tab down and insert the ppropriate wire into the exposed hole (Figure 8). 1. Connect one end of a 20-foot cable to the right cube speaker. 2. Connect the other end to the RIGHT OUTPUT TO CUBE SPEAKERS terminals on the Acoustimasse module (see Figure 10 on page 11). 3. Repeat to connect the left cube speaker to the LEFT OUTPUT TO CUBE SPEAKERS terminals. 4. Repeat to connect the center cube speaker to CENTER OUTPUT TO CUBE SPEAKERS terminals. CAUTION: Do not connect the cube speakers directly to the receiver. Red terminal tab (1-) Marked wire (+) Figure 8 Inserting wire into cube speaker terminals •Surround speakers For connections to the surround speakers, slide one terminal lever aside to insert the appropriate wire. Release the lever to secure the wire. 1. Connect one end of a 50-foot cable to one speaker. 2. Connect the other end to the RIGHT SURROUND SPEAKER outputs on your receiver. 3. Repeat 1 and 2 to connect the cable from the other speaker to the LEFT SURROUND SPEAKER outputs. Red terminal lever (+) Marked wire (+) Figure 9 Inserting wire into surround speaker terminals a 0 0 • 9