Bose SoundTouch 130 Home Theater Owners Guide - Page 25
Using the System
View all Bose SoundTouch 130 Home Theater manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Using the System Program the remote to control your source If your source does not support CEC, you can program the universal remote to control your source, such as a TV, DVD/Blu-ray Disc™ player, cable/satellite box, game system or DVR, by entering the code for your source's brand. There may be several codes for your source. You may need to perform this procedure multiple times to locate the correct code. Locate your source's code 1. Power on your source. 2. Locate the code for your source's brand in the Universal Remote Device Codes book (provided). Enter your source's code 1. On the remote control, press and hold the appropriate source button until all six source buttons glow, then release. For example, to program your TV, press and hold buttons glow, then release. until all six source The appropriate source button continues to glow. 2. On the number keypad, enter the code for your source's brand and press + on the volume button. Test your source's code 1. Test your source for basic functions. Follow the instructions for your source: • TV: press the channel buttons. Press Press and to navigate. . The settings menu appears. • Cable/satellite box: press Press and to navigate. . The programming guide appears. • DVD or Blu-ray Disc™ player: press Press and to navigate. . The settings menu appears. • Game system: press and to navigate through your menu. 2. Based on your source's response to basic functions: • Remote responds accurately: press save your settings. to exit programming and • Remote does not respond or does not respond accurately: -- If your source button glows: press + on the volume button to move to the next code. Repeat steps 1-2 in "Test your source's code". You may need to repeat this procedure 30 or more times. If all six buttons blink three times, you have cycled through all codes for your source. -- If your source button is off: your remote exited programming mode. Repeat steps 1-2 in "Enter your source's code" and steps 1-2 in "Test your source's code". Note: Your source may not be compatible with IR universal remote controls. Refer to your source's owner's guide for more information. English - 25