Bose SoundTouch 130 Home Theater Owners Guide - Page 37
If your console cannot find the Acoustimass, module, ADAPTiQ, audio calibration error messages
View all Bose SoundTouch 130 Home Theater manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Care and Maintenance If your console cannot find the Acoustimass® module The Acoustimass module and console are paired at the factory. However, if you see the error message Cannot find Acoustimass on the display, perform this pairing procedure: 1. Unplug the Acoustimass module. 2. Press on the remote control. 3. Press until 15 PAIR ACOUSTIMASS appears on the display. 4. Press . Plug in Acoustimass appears on the display. 5. Plug the AC power cord into an AC (mains) outlet. After the Acoustimass module connects to the console, Pairing complete appears on the display. Note: For alternate connection options due to excessive wireless interference, contact customer service. ADAPTiQ® audio calibration error messages Listen to the voice prompts for the following error messages: Error message 1 2 3 4 5 Problem The microphone on the ADAPTiQ headset cannot detect sound. The room is too loud. The ADAPTiQ headset is too close to the speakers. The listening locations are too similar. The ADAPTiQ headset cannot take measurements due to movement. What to do • Secure all speaker cables. • Ensure the microphone opening on the top of ADAPTiQ headset is not blocked. • Your ADAPTiQ headset may be damaged. Call Bose® customer service for replacement parts. Refer to the contact sheet in the carton. Restart the ADAPTiQ audio calibration when the room is quiet. Move the ADAPTiQ headset farther away from the speakers. Move 1 - 2 ft. (.3 - .6 m) away from your previous listening location. Hold your head still. After correcting your problem, you must restart the ADAPTiQ audio calibration (see page 21). If you hear a different error message, call Bose customer service for further instructions. Refer to the contact sheet in the carton. English - 37