Bowflex Blaze Assembly Manual - Page 21
Step 24 - Attach the Accessory Basket, Step 25 - Route the Rod Cables - accessories
View all Bowflex Blaze manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Assembly Guide Step 24 - Attach the Accessory Basket Locate the following items: • Item #CC - Accessory Basket Place the hooks on the Accessory Basket over the the Chest Bar as shown. Figure 24 Chest Bar Accessory Basket Step 25 - Route the Rod Cables Locate the following items: • Item #S - (2) Hand Grips • Item #V - (2) Snap Hooks • Item #Y - (2) Rod Cables with (2) Snap Hooks (attached) Figure 25 - Rod Cables Rod Cap Rod Hook Unwrap the Cables from both Pulleys on the Chest bar. Pull one end of the Cable from the Chest Pulley upwards. Attach the Cable to one Rod Cap by hooking the Rod Hook through the hole in the Rod Cap. Then, fasten one Hand Grip to the Snap Hook on the opposite Hand end of the Cable, as shown in Figure 23. Grip Repeat for remaining Chest Pulley Rod Cable. Snap Hook 19