Brother International 1030e Owners Manual - Page 36
How To Use On-screen Programming Osp And Help Key
View all Brother International 1030e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
HOW TO USE ON-SCREEN PROGRAMMING (OSP) AND HELP KEY Level one function Level two function 4. CONTRAST Explanation of Options Factory setting Chapter There are three types of contrast setting. Usually the AUTO setting is acceptable. But if you want to send or copy an especially light or dark document, you should change this setting. AUTO: Default is AUTO. Contrast setting always AUTO 6 reverts to AUTO after one transmission. LIGHT: To send very light documents. DARK: To send very dark documents. If you need to send a set of originals at various 1. TEMP. resolutions, this function will allow you to set the (TEMPORARY) 5. RESOLUTION required resolution page by page. (If all documents STANare the same resolution, use the Resolution. See DARD 6 SETTINGS chap. 2.) STANDARD/FINE/S. FINE/PHOTO If you have trouble when sending overseas, you 6. OVERSEAS may want to set OVERSEAS MODE to ON. MODE ON/OFF OFF 6 An automatic Cover Page will allow you to send 7. COVERPAGE details of when the fax was sent and from whom it OFF 6 was sent. ON/OFF 2. CANCEL JOB If you wish to cancel a job that has been set with the timer, a polled job etc., use this function. 6 3. PRINT REPORTS See page 13-1 for a list of reports. You can print several different lists and reports, which are available under this function. 13 If you register names and numbers on One-Touch 1. ONE-TOUCH dial keys, you can dial a number automatically just DIAL by pressing a One-Touch key. (Max. of 24 locations) 4 4. SET If you register names and numbers as Speed-Dial QUICKDIAL 2. SPEEDDIAL numbers, you can dial a number automatically just by pressing Speed-dial and a two-digit number. 4 (Max. of 36 locations for FAX 1020 Plus and 100 locations for FAX 1030 Plus.) 3. SETUP GROUPS This is used for setting up a group number used for broadcasting. 4 Smoothing enhances the appearance of incoming 1. SMOOTHING faxes. ON 7 5. USER OPTIONS If you set SMOOTHING to ON, you will receive fax messages with the smoothing enhancement. ON/OFF 2. BEEPER You can adjust the volume of the beeper with this LOW 4 function. OFF/LOW/HIGH 3-3