Brother International 1030e Owners Manual - Page 56
Using Memory Security Only for FAX 1020 Plus, Setting Up Memory Security for the First Time
View all Brother International 1030e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
FUNCTION SETTINGS Using Memory Security (Only for FAX 1020 Plus) This feature allows you to prevent unauthorised access to the fax machine. You must use a password to switch Memory Security ON and OFF. When switched ON, Memory Security prohibits most functions . The following functions listed are available while Memory Security is switched ON. s Receiving faxes into memory [limited by Memory Capacity] s Scheduled Delayed Transmission. * s Polling * s Fax Forwarding * s Remote Retrieval * Provided it was set before Memory Security was switched ON. NOTE: In the event of a power failure, remaining jobs in memory will be lost. Setting Up Memory Security for the First Time KEYS TO PRESS 1. Press Menu. 2. Press 5. 3. Press 8. 4. Enter a four-digit number as a new password. 5. Press Set. 6. Re-enter the password. 7. Press Set. 8. Press Z (left arrow) or X (right arrow) to choose SET SECURITY. 9. Press Set. 10. Re-enter a 4-digit password, followed by set. THE DISPLAY WILL SHOW: 09/12 15:25 FAX 1.TEMP.SETTINGS 5.USER OPTIONS 8.MEM SECURITY NEW PASSWD:XXXX VERIFY:XXXX SET SECURITY PASSWORD:XXXX SECURE MODE s This is the same as the security code of your machine already stored. 4-13