Brother International 1030e Owners Manual - Page 87

RECEIVING FAXES AND OTHER CALLS - CHAPTER 7 Automatic Fax Only Reception (FAX Mode) You can automatically receive all your faxes in Automatic Fax Reception mode (FAX light is ON). Select this mode by pressing Mode. Manual Reception (MANUAL Mode) When you set the Answer Mode to manual, you must answer each incoming call yourself. Here is what you should do when using MANUAL Mode: If You Get a... 1. Phone call 2. Phone call and request to send a fax 3. Fax tone... Then You Should... Talk as you normally would. Press Start when finished talking, and replace the handset. Note: Sender must also press Start. Press Start, and replace the handset. Fax Detect When you use this feature, you don't have to press Start, but need to wait for several seconds quietly, when you answer a fax call. Just replace the handset after your fax machine begins to receive the fax. Selecting "ON" allows the machine to receive fax calls automatically, even if you lift the handset of an extension. Selecting "SEMI" lets the fax machine receive the call only if you've answered it at the fax machine. Selecting "OFF" means you'll have to activate the fax machine yourself by pressing Start or entering the remote activation code from an extension phone. KEYS TO PRESS THE DISPLAY WILL SHOW: 1. Press Menu. 2. Press 7. 09/12 15:25 FAX 1.TEMP.SETTINGS 7.SETUP SYSTEM 3. Press 6. 6.FAX DETECT FAX DETECT:ON 4. Press Z (left arrow) or X (right arrow) to choose ON, SEMI or OFF. Example: SEMI. SELECT { } & SET FAX DETECT:SEMI 7-2