Brother International 1034D Users Manual - English and Spanish - Page 23
Antes de enhebrar
View all Brother International 1034D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
TABLE OF Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter CONTENTS 1 2 3 4 5 6 Before threading (1) Turn off the main power switch for safety. (2) Raise the presser foot using presser foot lever. CAUTION When threading the needle, always be sure to lift the presser foot lever, and also take care to thread in the proper order. (3) Set the needle bar in its highest position by turning the handwheel toward you. Turn the handwheel to find the easiest position for threading, and then thread the upperlooper thread, lowerlooper thread, right needle thread and then the left needle thread. The proper threading order for this serger is upperlooper, lowerlooper, right needle, and then the left needle. 1 Slide to the right 2 Thread tension discs 3 Correct 4 Wrong Antes de enhebrar (1) Apagar el interruptor principal por seguridad. (2) Levantar el prensatelas con la palanca. PRECAUCION Al enhebrar la aguja, se debe asegurar de levantar la palanca del prensatelas, y también de enhebrar en el orden correcto. (3) Colocar la aguja en la posición más alta, girando la polea hacia afuera. Girar la perilla hasta encontrar la posición más fácil para enhebrar, y luego enhebrar el hilo del áncora superior, él del áncora inferior, él de la aguja derecha y él de la aguja izquierda o él de la aguja de puntada de doble cadeneta (sólo en el modelo de 5 hilos), en ese orden. El orden de enhebrado correcto de esta máquina es el siguiente: áncora superior, áncora inferior, agujas derechas y luego aguja izquierda. 1 Deslice hacia la derecha 2 Discos de tensión de hilo 3 Correcto 4 Incorrecto 1 6 5 4 2 6 5 4 6 5 4 3 4 7 8 9 10 11 12 13 14 15 16 17 18 16