Brother International 1034D Users Manual - English and Spanish - Page 56
Lower Looper Thread Tension :Slightly Slackened
View all Brother International 1034D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
TABLE OF Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter Chapter CONTENTS 1 2 3 4 5 6 7 NOTE: The following are the recommended setting. Stitch Width :5 mm (Two-needle models) 3.5 mm (One-needle models) Stitch Length :3 ~ 4 mm Needle Thread Tension :Slightly Slackened (0-2) Upper Looper Thread Tension :Slightly Tightened (5-7) Lower Looper Thread Tension :Slightly Slackened (2-4) Test sew on a scrap of the fabric to adjust the fabric guide and the thread tension. 1 Reverse 2 Needle path 3 Adjusting screw 4 Fabric guide NOTA: Los ajustes recomendados son los siguientes: Ancho de puntada :5 mm (Modelos de dos agujas) 3,5 mm (Modelos de una aguja) Largo de puntada :3 - 4 mm Tensión del hilo de la aguja :bastante floja (0-2) Tensión del hilo del áncora superior :bastante apretada (5-7) Tensión del hilo del áncora inferior :bastante floja (2-4) Haga una prueba de costura en un pedazo de tejido para poder ajustar adecuadamente la guía de tejido y la tensión de los hilos. 1 Revés 2 Paso de la aguja 3 Tornillo de ajuste 4 Guía del tejido a 41 2 A 1 2 B 3 C4 gh 3 c 2 1 i i 4 8 9 10 11 12 13 14 15 16 17 18 49