Brother International 1860C User Guide - Page 34
Mode Timer, Paper settings, Paper Type, Volume Settings, Ring Volume
UPC - 012502615880
View all Brother International 1860C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chapter 3 Mode Timer 3 The machine has mode keys on the control panel: Fax, Scan (MFC-3360C only), and Copy. You can change the amount of time the machine takes after the last Scan or Copy operation before it returns to Fax mode. If you choose Off, the machine stays in the mode you used last. a Press Menu, 1, 1. b Press a or b to choose 0 Sec, 30 Secs, 1 Min, 2 Mins, 5 Mins or Off. Press OK. c Press Stop/Exit. Paper settings 3 Paper Type 3 To get the best print quality, set the machine for the type of paper you are using. a Press Menu, 1, 2. b Press a or b to choose Plain Paper, Inkjet Paper, Brother Photo, Other Photo or Transparency. Press OK. c Press Stop/Exit. Note The machine ejects paper with printed surfaces face up onto the paper tray in the front of the machine. When you use transparencies or glossy paper, remove each sheet at once to prevent smudging or paper jams. Paper Size 3 You can use five sizes of paper for printing copies: Letter, Legal, A4, A5, and 4" × 6" in. (10 × 15 cm) and three sizes for printing faxes: Letter, Legal and A4. When you change the size of paper you load in the machine, you will need to change the paper size setting at the same time so your machine can fit an incoming fax on the page. a Press Menu, 1, 3. b Press a or b to choose Letter, Legal, A4, A5 or 4"x6". Press OK. c Press Stop/Exit. Volume Settings 3 Ring Volume 3 You can choose a range of ring volume levels, from High to Off. While in Fax mode , press d or c to adjust the volume level. The LCD shows the current setting, and each key press will change the volume to the next level. The machine will keep the new setting until you change it. You can also change the volume through the menu, by following the instructions below: Setting the Ring Volume from the menu 3 a Press Menu, 1, 4, 1. b Press a or b to choose Low, Med, High or Off. Press OK. c Press Stop/Exit. 18