Brother International BAS-300 Series Programmer Instruction Manual - English - Page 10
Sewing, Examples, Square, label, sewing, quare, label, sewin, Vertical, double
View all Brother International BAS-300 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Sewing Examples Square label sewing End Start r 1 quare label and sub-label sewin • Be sure to start programming from the start position as shown in the left-hand figure. • It is advisable to use the Ill key on the programmer device for easier operation. • Make a back stitch within the crank range as shown in the left-hand figure. Cycle time Productivity 10 sec About 2,000 pcs/day • Process the OT presser plate so that the sub-label can fit there. End Start © ii ca ( Vertical double label sewing ) I Start e --- : O S_ End 4 Feed ---e 0 Floating label sewing Label li. Start 1 t End Body • Using the presse foot C prevents skipped stitches. C. Presser foot C 152637-001 Cycle time 15 sec Productivity About 1,300 pcs/day • After sewing the left side, cut the thread, feed the material and start sewing the right side. • If there are too many bird's nests in the thread remainings on the reverse side of the material or if thread trimming is intended to be carried out later, the program (999L) that keeps the thread cutter inactive is available. • To make a floating name sewing for knitted materials, keep pulling the material slightly while sewing. Cycle time Productivity 12 sec About 1,680 pcs/day