Brother International BAS-300 Series Programmer Instruction Manual - English - Page 27
Basting
View all Brother International BAS-300 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
8. Basting Programming Procedure (Example 1) 8 3 2 7 L 5 L. 999. F L. 999. F (Example 2) 1 2 999. F L 11 10 12 L. 999. F 4 7 8 5 6 BAS-304.311 1. Press the El key. (The clamp will move to the machine origin point.) 2. Use the jog key to move the clamp to the sewing start position. 3. Program the first stitch by pressing the E key. 4. In the same way, program the second and third stitches by pressing the E key. Note, however, that movement should be made for two or more pulses. 5. After "999" is displayed in the third stitch position, press the E key, and move the needle to the fourth stitch by pressing the jog key. 6. Program by pressing the(:1key. 7. In the same way, program the movement from the fourth stitch to the fifth stitch, from the fifth stitch to the sixth stitch, and from the sixth stitch to the seventh stitch. 8. Program the eight and ninth stitches by using the jog key and theE key. 9. After programming the ninth stitch, key in "111 E". 10. Then, the clamp will return to the sewing start position. 11. Press the READ/WRITE switch to store the program in the floppy disk. 12. Press the 0 key to clear the display of the programming machine. ork Clamp L 513091-001 Feed plate 513092-001 Work Clamp R 513090-001 -21-