Brother International BAS-300 Series Programmer Instruction Manual - English - Page 12
stage, positioning, presser, clamp
View all Brother International BAS-300 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Two-stage positioning presser clamp • If the emblem has already been pasted to the body, it is advisable to set the clamp in the two-stage positioning press for easier positioning and emblem sewing. • This can be used for sewing large-sized materials for which the sewing position is hard to determine. Standard Modified 0 Cylinder 1 Spring 105227-001 nil Jil T-joint S01202-000 Air hose 4 x2 5 500974-001 Blind cap SO4897-001 .I r" ---- Note: Set the DIP switches Not 2 and 4 to the ON position. [Operation Method] 1) If the foot switch pedal is depressed to the first stage, the cylinder air will be released and the clamp will be lowered by the spring pressure. The material is not yet pressed at this stage. 2) If the foot switch pedal is depressed to the second stage, air will enter the cylinder and both clamps will firmly press the material. 3) Then, if the foot switch pedal is depressed again, both clamps will be raised. -6-