Brother International BAS-300A Application Instruction Manual - English - Page 37
Follow, suggestions, mentioned, below, obtain, maximum, useful, micro, disk.
View all Brother International BAS-300A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
CHOWTOUSEANDMAINTAITNHEFLOPPYDISK) X Follow the suggestions mentioned below to obtain the maximum useful life of the micro disk. Do not touch the magnetic surface of the memory disc. Fingerprints not only cause the disk to become dirty, but also always cause an error in the program. 5 The disk should be used under the following conditions: Temperature: 10°- 15t Humidity: 20% - 80% r/h However,wet-bulb temperature: less than 29t (Avoid the use of the disk when adrupt changes in temperature occur.) 0 2 Do not bring solvents into contact with the magnetic surface of the disk. Avoid the use of thinner, alcohol, freon, etc. O 29t 50t 10tl-- - 6 The disk should be stored under the following conditions: Temperature: 4°- 53t Humidity: 8% - 80% r/h X XX 3 Do not bring magnets in the vicinity of the micro disk. Exposure to magnetic fields may result in erasure of the program on the memory of the disk. 53t 4t Be sure to avoid the use of magnetic paper stoppers, etc. on the micro disk. 4 Do not expose the disk to direct sunlight or bring it in the vicinity of a heating appliance. 0 SSSS 7 The disk should be transported under the following conditions: Temperature: 40°- 53t Humidity: 8% - 90% r/h Be sure to keep the disks stored in an appropriate box during transportation. 53t -40t O -34-