Brother International CE-5500PRW Users Manual - English - Page 21
Lower threading - bobbin
View all Brother International CE-5500PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Lower threading Raise the needle to its highest position by turning a the handwheel toward you (counterclockwise) or press (needle position button) (for models Install the bobbin wound with thread. equipped with the needle position button), and • For more details on quick-set bobbin, see page 20. raise the presser foot lever. 1 CAUTION Turn off the sewing machine. b ● Winding the bobbin improperly may cause the thread tension to loosen, breaking the needle and resulting in injury. Slide the button and open the cover. c 1 2 1 2 a Wound evenly b Wound poorly ● The bobbin was designed specifically for this sewing machine. If bobbins from other models are used, the machine will not operate correctly. Use only the enclosed bobbin or bobbins of the same type (part code: SA156, SFB). Actual size 11.5 mm (7/16 inch) This model Other models CAUTION ● Make sure you turn the power off while threading the machine. If you accidentally step on the foot controller and the machine starts to sew, you could be injured. Memo ● The direction for feeding the bobbin thread is indicated by marks on the needle plate cover. Be sure to thread the machine as indicated. a Cover b Slide button Put the bobbin in so the thread comes out in d the direction shown by the arrow. CAUTION ● Make sure you set the bobbin so the thread unrolls in the right direction. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or break the needle. 19