Brother International CE-5500PRW Users Manual - English - Page 90

otherwise the upper thread may become

Get Brother International CE-5500PRW PDF manuals and user guides View all Brother International CE-5500PRW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 90 highlights

APPENDIX Insert the bobbin case so that the U mark on p the bobbin case aligns with the { mark on the race. Check the condition of the needle, and then r install it. If the needle is in a poor condition, for example, if it is bent, be sure to install a new needle. • Refer to "Checking the needle" (page 29) and "Replacing the needle" (page 29). CAUTION ● Never use bent needles. Bent needles can easily break, possibly resulting in injuries. • Align the U and { marks. Note ● After completing this procedure, continue with the following procedure in "Checking machine operations" to check that the machine is operating correctly. Memo ● Since the needle may have been damaged when the fabric was caught in the machine, we recommend replacing it with a new one. a U mark b { mark c Bobbin case • Make sure that the indicated points are aligned before installing the bobbin case. CAUTION ● Never use a bobbin case that is scratched, otherwise the upper thread may become tangled, the needle may break or sewing performance may suffer. For a new bobbin case (part code: XE7560-001), contact your nearest authorized service center. ● Make sure that you fit the bobbin case properly, otherwise the needle may break. Attach the needle plate cover according to q steps h and i in "Cleaning the bobbin case" (page 79 and 80). 88

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
88
APPENDIX
————————————————————————————————————————————————————————————————————————————————————————————————————————————
p
Insert the bobbin case so that the
U
mark on
the bobbin case aligns with the
{
mark on the
race.
• Align the
U
and
{
marks.
a
U
mark
b
{
mark
c
Bobbin case
• Make sure that the indicated points are
aligned before installing the bobbin case.
q
Attach the needle plate cover according to
steps
h
and
i
in “Cleaning the bobbin case”
(page 79 and 80).
r
Check the condition of the needle, and then
install it.
If the needle is in a poor condition, for
example, if it is bent, be sure to install a new
needle.
• Refer to “Checking the needle” (page 29)
and “Replacing the needle” (page 29).
Note
●
After completing this procedure, continue
with the following procedure in “Checking
machine operations” to check that the
machine is operating correctly.
Memo
●
Since the needle may have been damaged
when the fabric was caught in the machine,
we recommend replacing it with a new one.
●
Never use a bobbin case that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new bobbin
case (part code: XE7560-001), contact your
nearest authorized service center.
●
Make sure that you fit the bobbin case
properly, otherwise the needle may break.
CAUTION
●
Never use bent needles. Bent needles can
easily break, possibly resulting in injuries.
CAUTION