Brother International CE-5500PRW Users Manual - English - Page 22
For models equipped with the quick-set bobbin - sewing machine model
View all Brother International CE-5500PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
KNOWING YOUR SEWING MACHINE Hold the end of the thread, push the bobbin e down with your finger, and then pass the thread through the slit, as shown. • If the thread is not correctly inserted through the tension-adjusting spring of the bobbin case, it may cause incorrect thread tension (page 41). Raise the needle to its highest position by turning a the handwheel toward you (counterclockwise) or press (needle position button) (for models equipped with the needle position button), and raise the presser foot lever. Turn off the sewing machine. b Slide the button and open the cover. c 1 2 1 a Tension-adjusting spring Replace the bobbin cover. Put the left tab in f place (see arrow a), and then press lightly on the right side (see arrow b) until the cover clicks into place. a Cover b Slide button Insert the bobbin with your right hand so that the d end of the thread is on the left, and then, after pulling the thread firmly around the tab with your left hand as shown, lightly pull the thread to guide it through the slit. • Replace the cover so that the end of the thread comes out from the left side of the cover (as shown by the line in the diagram). ■ For models equipped with the quick-set bobbin Memo ● The direction for feeding the bobbin thread is indicated by marks on the needle plate cover. Be sure to thread the machine as indicated. a Tab CAUTION ● Make sure you set the bobbin so the thread unrolls in the right direction. If the thread unrolls in the wrong direction, it may cause the thread tension to be incorrect or break the needle. 20