Brother International CE-5500PRW Users Manual - English - Page 23
place see arrow - bobbin case
View all Brother International CE-5500PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
While lightly holding down the bobbin with e your right hand as shown, guide the thread through the slit (a and b). Then, pull the thread toward you to cut it with the cutter (c). • At this time, check that the bobbin easily rotates counterclockwise. Replace the bobbin cover. Put the left tab in f place (see arrow a), and then press lightly on the right side (see arrow b) until the cover clicks into place. 1 a Slit b Cutter (Cut the thread with the cutter.) Note ● If the thread is not correctly inserted through the tension-adjusting spring of the bobbin case, it may cause incorrect thread tension (page 41). Memo ● You can begin sewing immediately without drawing up the bobbin thread. If you want to draw up the bobbin thread before you start to sew, follow to the procedure in "Drawing up the lower thread" (page 27). 1 a Tension-adjusting spring 21