Brother International CE-5500PRW Users Manual - English - Page 51
Remove the flat bed attachment and make
View all Brother International CE-5500PRW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Use a chalk to mark on the fabric about 5 mm c (3/16 inch) from the edge of the fabric, and then baste it. Unfold the edge of fabric, and position the e fabric with the wrong side facing up. 3 5 4 1 2 1 2 1 2 a Wrong side of fabric b Right side of fabric c Edge of fabric d Basting stitching e 5 mm (3/16 inch) Fold back the fabric inside along the basting. d 2 4 3 1 1 1 a Wrong side of fabric b Edge of fabric c Basting d 5 mm (3/16 inch) a Wrong side of fabric 3 b Right side of fabric c Basting d Edge of fabric Attach blind hem foot "R". f Select a stitch. g Remove the flat bed attachment and make h free-arm sewing possible. • For details on free-arm sewing, refer to "Stitching cylindrical pieces" (page 44). Slide the part that you wish to sew onto the i arm, make sure that the fabric feeds correctly, and then start sewing. a Arm Position the fabric with the edge of the folded j hem against the guide of the presser foot, and then lower the presser foot lever. R a Wrong side of fabric b Fold of hem c Guide 49