Brother International DCP-7065DN Users Manual - English - Page 56

Do one of the following, Start, Stop/Exit, Error Message, Cause, Action, Out of Memory - reset toner

Get Brother International DCP-7065DN PDF manuals and user guides
UPC - 012502627128
View all Brother International DCP-7065DN manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Error Message Out of Memory Print Unable XX Replace Drum Replace Toner Size Error DX Toner Ended Toner Low Cause Action The machine's memory is full. Do one of the following:  Press Start to copy the scanned pages. (Copy operation in progress)  Press Stop/Exit and wait until the other operations in progress finish, and then try again.  Reduce print resolution. (See the Basic tab in the Software User's Guide.) The machine has a mechanical problem. Do one of the following:  Disconnect the machine from the AC power outlet for several minutes, then reconnect it.  If the problem continues, call Brother Customer Service. It is time to replace the drum unit. Replace the drum unit. (See Replacing the drum unit on page 36.) The drum unit counter was not reset when a new drum was installed. Reset the drum unit counter. (See Resetting the drum counter on page 39.) The machine will stop printing until you replace the toner cartridge. If you have set the Toner setting to Stop, replace the toner cartridge with a new and unused genuine Brother toner cartridge. This will reset the Replace Toner mode. (See Replacing the toner cartridge on page 29.) If you have set the Toner setting to Continue, the machine will continue to print data until the LCD shows Toner Ended. For how to operate the machine in Continue mode, see Toner Settings in Chapter 1 of the Advanced User's Guide. The paper in the tray is not a Load either Letter, Legal or Folio paper for suitable size for automatic duplex automatic duplex printing, and then press printing. Start. (See Print media on page 85.) It is time to replace the toner cartridge. You will need to replace the toner cartridge soon. Replace the toner cartridge with a new one. (See Replacing the toner cartridge on page 29.) Buy a new toner cartridge before you get a Replace Toner message. 42

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
42
Out of Memory
The machine’s memory is full.
Do one of the following:
Press
Start
to copy the scanned pages.
(Copy operation in progress)
Press
Stop/Exit
and wait until the other
operations in progress finish, and then
try again.
Reduce print resolution. (See the
Basic
tab in the Software User's Guide
.)
Print Unable XX
The machine has a mechanical
problem.
Do one of the following:
Disconnect the machine from the AC
power outlet for several minutes, then
reconnect it.
If the problem continues, call Brother
Customer Service.
Replace Drum
It is time to replace the drum unit.
Replace the drum unit.
(See
Replacing the drum unit
on page 36.)
The drum unit counter was not
reset when a new drum was
installed.
Reset the drum unit counter.
(See
Resetting the drum counter
on page 39.)
Replace Toner
The machine will stop printing
until you replace the toner
cartridge.
If you have set the Toner setting to
Stop
,
replace the toner cartridge with a new and
unused genuine Brother toner cartridge.
This will reset the Replace Toner mode.
(See
Replacing the toner cartridge
on page 29.)
If you have set the Toner setting to
Continue
, the machine will continue to
print data until the LCD shows
Toner
Ended
. For how to operate the machine in
Continue mode, see
Toner Settings
in
Chapter 1
of the
Advanced User's Guide
.
Size Error DX
The paper in the tray is not a
suitable size for automatic duplex
printing.
Load either Letter, Legal or Folio paper for
automatic duplex printing, and then press
Start
. (See
Print media
on page 85.)
Toner Ended
It is time to replace the toner
cartridge.
Replace the toner cartridge with a new one.
(See
Replacing the toner cartridge
on page 29.)
Toner Low
You will need to replace the toner
cartridge soon.
Buy a new toner cartridge before you get a
Replace Toner
message.
Error Message
Cause
Action