Brother International DCP 8045D Quick Setup Guide - English - Page 45

Step 2 Installing the Driver & Software For Network Interface Cable Users For Mac OS® 8.6 to 9.2 Make sure that you have completed the instructions from Step 1 "Setting Up the Machine" on pages 2 - 5. 1 Make sure that the NC-9100h (Network Print/Fax Server) is installed into the DCP. (See Optional accessories in Chapter 15 of the User's Guide.) 2 Switch off and unplug the DCP from the AC outlet and disconnect it from your Macintosh® if you already connected an interface cable. 6 Click Install next to the MFL-Pro Suite for your country. 3 Turn on your Macintosh®. 4 Insert the supplied CD-ROM for Macintosh® into your CD-ROM drive. 7 Select Network Interface, and then click Install. 8 After the installation is completed, restart your Macintosh®. 9 Connect the network interface cable to the printer, and then connect it to a free port on your hub. 5 Double-click the Start Here icon to install the printer and scanner drivers. If the language screen appears, select your language. 0 Turn on the DCP by plugging in the power cord. Turn the Power Switch on. 42