Brother International DCP-J140W Users Manual - English - Page 38

Did You Change Blck?, No Cartridge, Cannot Detect, immediately wash it off with soap or - head cleaning

Get Brother International DCP-J140W PDF manuals and user guides View all Brother International DCP-J140W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

f Gently push the ink cartridge in until it clicks, and then close the ink cartridge cover. g The machine will automatically reset the ink dot counter. Note • If you replaced an ink cartridge, for example Black, the LCD may ask you to verify that it was a brand new one (Did You Change Blck?). For each new cartridge you installed, press a (Yes) to reset the ink dot counter for that color. If the ink cartridge you installed is not a brand new one, be sure to press b (No). • If the LCD shows No Cartridge or Cannot Detect after you install the ink cartridges, check that the ink cartridges are installed properly. Important • DO NOT take out ink cartridges if you do not need to replace them. If you do so, it may reduce the ink quantity and the machine will not know the quantity of ink left in the cartridge. • DO NOT touch the cartridge insertion slots. If you do so, the ink may stain your skin. • If ink gets on your skin or clothing immediately wash it off with soap or detergent. • If you mix the colors by installing an ink cartridge in the wrong position, clean the print head several times after correcting the cartridge installation. • Once you open an ink cartridge, install it in the machine and use it up within six months of installation. Use unopened ink cartridges by the expiration date written on the cartridge package. • DO NOT dismantle or tamper with the ink cartridge; this can cause the ink to leak out of the cartridge. 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
28
f
Gently push the ink cartridge in until it
clicks, and then close the ink cartridge
cover.
g
The machine will automatically reset the
ink dot counter.
Note
•
If you replaced an ink cartridge, for
example Black, the LCD may ask you to
verify that it was a brand new one
(
Did You Change Blck?
). For each
new cartridge you installed, press
a
(
Yes
)
to reset the ink dot counter for that color. If
the ink cartridge you installed is not a
brand new one, be sure to press
b
(
No
).
•
If the LCD shows
No Cartridge
or
Cannot Detect
after you install the ink
cartridges, check that the ink cartridges
are installed properly.
Important
•
DO NOT take out ink cartridges if you do
not need to replace them. If you do so, it
may reduce the ink quantity and the
machine will not know the quantity of ink
left in the cartridge.
•
DO NOT touch the cartridge insertion
slots. If you do so, the ink may stain your
skin.
•
If ink gets on your skin or clothing
immediately wash it off with soap or
detergent.
•
If you mix the colors by installing an ink
cartridge in the wrong position, clean the
print head several times after correcting
the cartridge installation.
•
Once you open an ink cartridge, install it in
the machine and use it up within six
months of installation. Use unopened ink
cartridges by the expiration date written on
the cartridge package.
•
DO NOT dismantle or tamper with the ink
cartridge; this can cause the ink to leak out
of the cartridge.