Brother International DCP-J140W Users Manual - English - Page 44
Error Message, Cause, Action, Ink Box Full, InkBox NearFull, Ink Low X, Cannot Print, Low Temperature
View all Brother International DCP-J140W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Error Message Ink Box Full InkBox NearFull Ink Low XXXXXXX Low Temperature Cause The ink absorber box or flushing box is full. These components are periodic maintenance items that may require replacement after a period of time to ensure optimum performance from your Brother machine. Because these components are periodic maintenance items, the replacement is not covered under the warranty. The need to replace these items and the time period before replacement is dependent on the number of purges and flushes required to clean the ink system. These boxes acquire amounts of ink during the different purging and flushing operations. The number of times a machine purges and flushes for cleaning varies depending on different situations. For example, frequently powering the machine on and off will cause numerous cleaning cycles since the machine automatically cleans upon power up. The use of non-Brother ink may cause frequent cleanings because non-Brother ink could cause poor print quality which is resolved by cleaning. The more cleaning the machine requires the faster these boxes will fill up. Action The ink absorber box or flushing box will need to be replaced. Contact Brother Customer Service or a Brother Authorized Service Center to have your machine serviced. (See Brother numbers uu page i.) Other reasons for cleaning are: 1 The machine automatically cleans itself after clearing a printer jam. 2 The machine automatically cleans itself after sitting idle for more than 45 days (infrequent use). 3 The machine automatically cleans itself after the ink cartridges have been replaced 12 times. Note Repairs resulting from the use of non-Brother supplies may not be covered under the stated product warranty. The ink absorber box or flushing box is nearly full. One or more of the ink cartridges are near the end of their life. The print head is too cold. The ink absorber box or flushing box will need to be replaced soon. Call Brother Customer Service or a Brother Authorized Service Center to have your machine serviced. (See Brother numbers uu page i.) Order a new ink cartridge. You can continue printing until the LCD shows Cannot Print. (See Ordering accessories and supplies uu page ii and Replacing the ink cartridges uu page 26.) Allow the machine to warm up. 34