Brother International DCP-J140W Users Manual - English - Page 60
Network, WPS/AOSS, WPS w/PIN Code, WLAN Status 1.Status, Signal, Comm. Mode, MAC Address, WLAN Enable - reset
View all Brother International DCP-J140W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Level1 3.Network (Continued) Level2 3.WPS/AOSS Level3 - Options - 4.WPS w/PIN Code - - 5.WLAN Status 1.Status 2.Signal Active(11b) Active(11g) Active(11n) AOSS Active Connection Fail - 3.SSID - 4.Comm. Mode - 6.MAC Address - - 7.WLAN Enable - 0.Network Reset - On Off* - See Network User's Guide. The factory settings are shown in Bold with an asterisk. Descriptions You can easily configure your wireless network settings using the onebutton push method. You can easily configure your wireless network settings using WPS with a PIN code. You can see the current wireless network status. You can see the current wireless network signal strength. You can see the current SSID. You can see the current Communication Mode. You can see your machine's MAC address from the control panel. Lets you use the wireless network connection. Restore all network settings to the factory settings. Page See . 50